2.4GHz 10 Watt Amplifier, OEM Module
2.4GHz Amplifier OEM ModuleDesigned for use as an add-on module with existing wireless radio equipment where high power is required. A 10 Watt amplifier with 33dB Tx gain and exceptionally linear performance, if used without AGC. The unit is also offered with Automatic Gain control (AGC). The AGC unit maintains full 10 watt output for all inputs between 7dBm and 20dBm. If linear output is required, the unit can be shipped without AGC.
Due to this higher RF output power, the unit is only offered for sale to Military, overseas or licensed customers. The unit requires proper mounting on metal for heat sinking.
Buy this Product
Buy this product today
Download Specifications
Product Spec #24603 »
Product Information
For more information about our products, please contact us directly at 301.838.4380 or email us at sales@shireeninc.com
Specifications
| Electrical | |
| Operating Range | 2400 - 2500 MHz |
| Operating Mode | TDD, Time Division duplex |
| Transmit Power | 40 dB, 10 Watt |
| Transmit Gain | 33 dB in Linear mode Varies with AGC |
| Transmit Input Power | 3 dB min 23 dB max |
| Receive Gain | 20 dB |
| Noise Figure | 2.5 dB |
| LED Indicators | Red for Receive (Default Mode) Green for Transmit |
| Power Consumption | 130mA Rx, 4.7A Tx @ 12 VDC |
| Operating Temperature | -40 °C to 70 °C |
| Mechanical | |
| Dimension | 3.0” x 4.0” |
| DC Power | "Over coax, using DC injector, or Direct feed via soldered wire" |
| Connectors | SMA female or soldered coax cable |
| Weight | 8.0 oz (with metal base plate) |
FCC notice: The marketing, sale and use of power amplifiers are governed by and subject to FCC rules & regulations under Part 15.247. Shireen’s ISM band amplifiers are available for export, military, OEM & licensed customers only. It is the responsibility of the purchaser/installer/operator to insure that only approved equipment/systems are deployed. Shireen provides full engineering support to OEMs interested in certified systems.
