2.4 GHz 1 Watt Amplifier OEM Module
2.4GHz Amplifier 22dB Gain
Designed for use as an add-on module with existing wireless radio equipment, 802.11b/g, AM/FM or video
products where higher power is required. This module offers low cost solution to all power problems. With PCB
size as1.75” x 0.75”, this is the smallest, linear 1 watt amplifier available anywhere.
The saturated output power is
almost 2 watts.
Extremely efficient unit, eliminates the need of any heat dissipation.
The unit can be powered via coax (with DC injector) or direct wire soldered to the PCB.
Buy Product
Buy this product today
Download Specifications
Product Spec #24203 »
Product Information
For more information about our products, please contact us directly at 301.838.4380 or email us at sales@shireeninc.com
Specifications
| Electrical | |
| Operating Range | 2400 - 2500 MHz |
| Operating Mode | TDD, Time Division duplex |
| Transmit Power | 32.5 dBm Saturated, 30dBm (1 Watt) linear |
| Transmit Gain | 22dB linear gain |
| Transmit Input Power | 1dBm min 12dBm max |
| Receive Gain | 16 dB |
| Noise Figure | 3.5 dB |
| LED Indicators | Red for Receive (Default Mode) Green for Transmit |
| Power Consumption | 40mA Rx, 1.2A Tx @ 6 VDC |
| Operating Temperature | -40 °C to 70 °C |
| Mechanical | |
| Dimension | 1.75” x 0.75” |
| DC Power | Over coax, using DC injector, or Direct feed via soldered wire |
| Connectors | SMA female |
| Weight | 1 Oz, (29g) |
FCC notice: The marketing, sale and use of power amplifiers are governed by and subject to FCC rules & regulations under Part 15.247. Shireen’s ISM band amplifiers are available for export, military, OEM & licensed customers only. It is the responsibility of the purchaser/installer/operator to insure that only approved equipment/systems are deployed. Shireen provides full engineering support to OEMs interested in certified systems.
