2.4GHz 1 Watt Amplifier- 15dB Gain
2.4GHz Amplifier Low Gain OEM ModuleDesigned for use as an add-on module with existing wireless radio equipment, 802.11b/g, AM/FM or video products where higher power is required. This module offers low cost solution to all power problems. With PCB size as1.75x" 0.75", this is the smallest 1 watt amplifier available anywhere in 2.4Ghz band. Extremely efficient unit, eliminates the need of any heat dissipation. The unit can be powered via coax (with DC injector) or direct wire soldered to the PCB.
Product Information
For more information about our products, please contact us directly at 301.838.4380 or email us at sales@shireeninc.com
Specifications
| Electrical | |
| Operating Range | 2400 - 2500 MHz |
| Operating Mode | TDD, Time Division duplex |
| Transmit Power | 30 dB, 1 Watt |
| Transmit Gain | 15 dB Linear gain |
| Transmit Input Power | 3 dB min 20 dB max |
| Receive Gain | 16 dB |
| Noise Figure | 3.5 dB |
| LED Indicators | Red for Receive (Default Mode) Green for Transmit |
| Power Consumption | 40mA Rx, 850mA Tx @ 6 VDC |
| Operating Temperature | -40 °C to 70 °C |
| PoE | 12V through 60V DC or 802.3af compliant (both options available) |
| Mechanical | |
| Dimension | 1.75" x 075" |
| DC Power | Over coax, using DC injector, or Direct feed via soldered wire |
| Connectors | MCX female, SMA female |
| Weight | 1.0 Oz. (29 g) |
FCC notice: The marketing, sale and use of power amplifiers are governed by and subject to FCC rules & regulations under Part 15.247. Shireen’s ISM band amplifiers are available for export, military, OEM & licensed customers only. It is the responsibility of the purchaser/installer/operator to insure that only approved equipment/systems are deployed. Shireen provides full engineering support to OEMs interested in certified systems.
