2.4GHz 2 Watt Amplifier, 24dB Gain
2.4GHz Amplifier OEM ModuleDesigned for use as an add-on module with existing wireless radio equipment where higher power is required. This module offers low cost solution to all power problems. High gain version, ideal for applications where signal drive is very low and high output is desired.
The unit can be powered via coax (with DC injector), DC jack or direct wire soldered to the PCB.
Buy this Product
Buy this product today
Download Specifications
Product Spec #24103 »
Product Information
For more information about our products, please contact us directly at 301.838.4380 or email us at sales@shireeninc.com
Specifications
| Electrical | |
| Operating Range | 2400 - 2500 MHz |
| Operating Mode | TDD, Time Division duplex |
| Transmit Power | 33 dBm, 2 Watt |
| Transmit Gain | 24 dB ( lower gain values available and set at factory) |
| Transmit Input Power | 2 dBm min 15 dBm max |
| Receive Gain | 18 dB |
| Noise Figure | 3.5 dB |
| LED Indicators | Red for Receive (Default Mode) Green for Transmit |
| Power Consumption | 90mA Rx, 1200mA Tx @ 9 VDC |
| Operating Temperature | -40 °C to 70 °C |
| Mechanical | |
| Dimension | 1.2” x 2.0” |
| DC Power | Via DC jack, Over coax, using DC injector, or Direct feed via soldered wire |
| Connectors | SMA female |
| Weight | 1.0 Oz. (29 g) |
FCC notice: The marketing, sale and use of power amplifiers are governed by and subject to FCC rules & regulations under Part 15.247. Shireen’s ISM band amplifiers are available for export, military, OEM & licensed customers only. It is the responsibility of the purchaser/installer/operator to insure that only approved equipment/systems are deployed. Shireen provides full engineering support to OEMs interested in certified systems.
