3.4-3.5GHz Amplifier, 5Watt
3.4-3.5GHz Outdoor AmplifiersDesigned for use with WiMAX product as an add on module or stand alone outdoor amplifier. With peak power output of 37~38dBm, the unit can be used as 1 watt amplifier for OFDM radios requiring high linearity. Due to this higher RF output power, the unit is only offered for sale to Military, overseas or licensed customers. The unit requires proper mounting on metal for heat sinking if used with video applications. For standard OFDM, no heat sink required.
Buy Product
Contact us today to purchase this product »
Download Specifications
Product Spec #34105 »
Product Information
For more information about our products, please contact us directly at 301.838.4380 or email us at sales@shireeninc.com
Specifications
| Electrical | |
| Operating Range | 3400 - 3500 MHz |
| Operating Mode | TDD, Time Division duplex |
| Peak Transmit Power | 36~38 dBm |
| Transmit Gain | 12 ~15 dB |
| Transmit Input Power | 3dBm min 22 dBm max |
| Receive Gain | 18 dB |
| Noise Figure | -2.5 dB |
| LED Indicators | Red for Receive (Default Mode) Green for Transmit |
| Power Consumption | 2.0 amp for Tx and 150mA for Rx modes |
| Operating Temperature | -40 °C to 65 °C |
| Weight | 8.0 oz (with metal base plate) for OEM module; 1 lb 7 oz for outdoor enclosure |
| RF Connectors | SMA for OEM module Type N female for outdoor housing |
| DC Power | Over coax, using DC injector, or Direct feed via soldered wire |
FCC notice: The marketing, sale and use of power amplifiers are governed by and subject to FCC rules & regulations under Part 15.247. Shireen’s ISM band amplifiers are available for export, military, OEM & licensed customers only. It is the responsibility of the purchaser/installer/operator to insure that only approved equipment/systems are deployed. Shireen provides full engineering support to OEMs interested in certified systems.
