900 MHz 10Watt Amplifier
900 MHz High Power Amplifiers, Outdoor UnitThis high power, bi-directional amplifier is designed for 902~928
MHz radio products. Works equally well with all types of radios.
Designed in a completely weatherproof housing for all outdoor
applications. The unit is powered over coax with DC injector.
| SALIENT FEATURES: |
| Transmit Gain: The unit provides 30 dB of gain. |
| LNA: The built-in Low Noise Amplifier with signal gain of 19 dB with a ultra low noise figure of only 1.8 dB. Improves the receive sensitivity of remote equipment, while keeping noise level very low. |
| Receive Filtering: All radio equipment contain filter for receive path. The band pass filter on this amplifier gives added protection against out of band noise. |
| Enclosure: The unit is housed in machined, Anodized Aluminum enclosure, designed according to the location of critical components. With appropriate cavities and contacts the PCB performs optimally and NO heat sink is needed. |
| DC Injector: With only 0.8dB insertion loss, this DC injector is the lowest loss available anywhere. Enclosed in specially designed machined aluminum housing. |
| Warranty: All Shireen’s products come with 2-year warranty. |
| This set includes: * The Outdoor Amplifier * DC injector, and * Universal power supply (110~240VAC to 12VDC) |
**Also Available in 25 Watt »
Buy Product
Buy this product today
Download Specifications
Product Spec #90210 »
Product Information
For more information about our products, please contact us directly at 301.838.4380 or email us at sales@shireeninc.com
Specifications
| Electrical | |
| Operating Range | 902-928 MHz |
| Operating Mode | TDD, Time Division duplex |
| Transmit Power | 40 dBm, 10Watt (+44 dBm*, 25Watt*) |
| Transmit Gain | 30 dB |
| Transmit Input Power | 12 dBm (min) 25 dBm (max) |
| Receive Gain | 19 dB |
| Noise Figure | 42.9 dB |
| P1DB for LNA | 10 dBm |
| Power Consumption | 110mA Rx, 3560 mA Tx @ 12 VDC |
| Operating Temperature | -40 °C to 70 °C |
| Mechanical | |
| Amplifier: | Dimension: 6” x 3.5” x 1.1” (152.4mm x 88.9mm x 28.91mm) Enclosure: Watertight machined aluminum housing with Anodized finish Connectors: Type N female Weight: 1lb 3oz (512 g) |
| DC Injector: | Dimension: 1.4” x 3.5” x 1.0” (35.5mm x 88.9mm x 25.4) Enclosure: Machined aluminum housing with Anodized finish Connectors:Type N female Weight: 2 Oz. (134 g) |
FCC notice: The marketing, sale and use of power amplifiers are governed by and subject to FCC rules & regulations under Part 15.247. Shireen’s ISM band amplifiers are available for export, military, OEM & licensed customers only. It is the responsibility of the purchaser/installer/operator to insure that only approved equipment/systems are deployed. Shireen provides full engineering support to OEMs interested in certified systems.
