COFDM Digital Video Link
Model# DVL-SD125From mission critical video links on UAVs to industrial robotics, these COFDM digital links provide long range connectivity over wide frequency range. With optional power output of 1Watt, these units provide unparalleled performance.
Product Information
For more information about our products, please contact us directly at 301.838.4380 or email us at sales@shireeninc.com
Download Specifications
Product Specs for Video Link »
Specifications
| Power: | |
| Voltage: | 9VDC to 36VDC, unregulated |
| Current: | TX (0.1W)=0.7A, RX=0.8A |
| Controls: | Power on/off, remote power on/off |
| Protection: | Reverse Polarity, Under Voltage, Over Voltage |
| RF: | |
| Tuning Range: | CSD-L: L Band (1.15GHz to 1.40GHz) or customer specific CSD-S: S Band (2.28GHz to 2.48GHz) or customer specific CSD-C: C Band (5.725GHz to 5.885GHz) or customer specific |
| Tuning: | Sixteen preset channels in above tuning range via remote control on RX. |
| Bandwidth: | 2 or 8 MHz (4, 6MHz optional), factory preset |
| Modulation: | COFDM with QPSK or 16QAM sub-carriers, factory preset |
| RF Output Power: | 0.1W (optional 1W) |
| Receiver: | Uses a two antenna diversity topology |
| I/O: | |
| Video: | SD interface, NTSC or PAL H.264 compressed via a 75 ohm BNC. JPEG2000 optional. End to end latency 250mS. |
| Audio: | Two channels, differential, 600ohm via LEMO 0B with 5 pins |
| Data: | Half Duplex, two way @ 38Kbps via LEMO 0B with 6 pins |
| Size: | TX:119 x 75 x 20 mm (Anton Bauer format) RX:200 x 200 x 40 mm (2 units fit in 1U RETMA Rack) |
| Weight: | TX: 456 grams including heat sink RX: 600 grams |
| Connectors: | Power via Lemo 0B connector RF via SMA connector |
Back to top »
