Surge/Lightning Protector
AISG Based Systems
Designed for RF infrastructures with AISG based systems. Fully compliant to AISG EIA-485 Layer 1, protecting both data and power lines.
Download Specifications
Product Spec #50-510 »
Product Information
For more information about our products, please contact us directly at 301.838.4380 or email us at sales@shireeninc.com
Features Include:
| All pins individually protected |
| Outdoor IP67 compliant housing |
| Allow DC pass thru for tower mounted amps |
| Ruggedized design |
| IP65 rated for outdoor installs |
Applications:
| Remote Electrical Tilt (RET) applications |
| AISG compliant antenna control units |
| Tower mount amplifiers with AISG interface |
| Control Network interfaces with AISG interface |
Specifications
| Protocol: | AISG 1.1 : AISG 2.0 |
| Signal: | Data and DC |
| Power line insertion Resistance: | 0.5 ohm (max) |
| Data/Signal line insertion Resistance: | 1.0ohm (max) |
| Overcurrent Protection: | PTC Fuse |
| SPD type: | 7 x bipolar gas tubes, Sidactors and PTC fuse |
| Max Opearting Current: | 4 A (at 50 ºC) |
| Max Operating Voltage: | 60V |
| Max Impulse Current: | 25kA (Housing), Inner conductors: 2.5kA/pin (10/350us) |
| Max Dynamic Overvoltage: (1kV/us) | <700 V |
| Static Overvoltage: (100 V/s): | <100 V |
| Mechanical Specifications: | |
| Dim: | 4.5”x2.5”x2.5” (including mouting bracket) |
| Weight: | 11 oz. |
| Material: | Die Case AL Alloy |
| Connectors: | AISG male and female |
Back to top »
