5.8GHz Access Point Model 5800
Octopus Wireless Series
Our Octopus 5800 Access Point is an industrial grade outdoor solution. Easily configured as an Access Point or Bridge it comes in a ruggedized outdoor housing. The unit utilizes Power over Ethernet (PoE), reducing installation costs and making installation a snap! With this unit you can choose the best antenna for your application.
| Model 5800 Features: |
| StreamEngine™ QoS Technology within CPU |
| Net Accelerator supports heavy gaming traffic |
| Supports data rates up to 108 Mbps |
| Strong network security with WPA, WPA2 and 64/128 bit WEP encryption |
| RADIUS MAC authentication and MAC Address Filtering |
| Supports bandwidth and SNMP Management control |
| Provide Window-base Utility, Web, CLI (Command Line Interface) Configuration |
| Adjustable Tx Power Settings |
| Configurable ACK Timeout for long distance |
Buy Product
Buy this product today
Downloads
Product Spec #40510 »
User Manual
Basic Point-to-Point Setup
AP Firmware (20080427)
Client Firmware
(20080427)
Product Information
For more information about our products, please contact us directly at 301.838.4380 or email us at sales@shireeninc.com
Specifications
| Standard Compliance | 802.11a |
| Modulation | OFDM w/BPSK, QPSK, 16 QAM, 64 QAM |
| Frequency Band | 5120-5250, 5250-5350, 5725-5825 MHz |
| RF Output Power: | 200mW standard (1watt optional) |
| Emission Type | DSSS / OFDM |
| Data Rates | Up to 54Mbps |
| Power (over Ethernet) | 48V, 0.5Amp |
| Data Security | WPA, WPA2 & 64/128 bit WEP Data Security |
| Hardware | 250 MHz, 4MB Flash, 32MB SD RAM |
| System Utility | Watchdog |
| IP Address Assignment | DHCP |
Mechanical |
|
| Housing | IP66 rating, Die Cast Aluminum, Grey |
| Dimensions | 9”x 6”x 3” |
| Weight | 3.3 lbs |
| Connectors | NF and watertight RJ45 |
| LED | Power, signal level, Noise level & WAN |
| Mount | Pole/ wall mount bracket included |
Back to top »
