Features & Benefits
  • Broadband performance with low reflection DC to 6 GHz, providing a high-quality solution at a low cost
  • Quick connect/disconnect snap-on mating reduces installation time
  • Conforms to European CECC 22000 specifications
  • Available in straight and right angle plugs and printed circuit board connectors

How to buy this Product

Buy Now

 

 

We offer the following standard and custom MMCX connectors:

Applications

 

Online Store 2D Drawing
MMCX Female for RG316 / RG174A-U / LMR100A / RFC100A
MMCX Male for RG316 / RG174A-U / LMR100A / RFC100A
MMCX Male Right Angle for RG316 / RG174A-U / LMR100A / RFC100A
MMCX Male Right Angle Reverse Polarity for RG316 / RG174A-U / LMR100A / RFC100A
MMCX Male Right Angle for 1mm Cable

 

  • Antennas
  • Base stations
  • Broadband communications
  • Cable assemblies
  • Components
  • GPS
  • Instrumentation
  • PCMCIA cards
  • Radio boards
  • Satcom
  • Telecom
 

Electrical CECC 22000
Impedance 50 Ω
Frequency Range DC – 6 GHz
VSWR 4.4.1 1.15 max. @ DC – 4 GHz
1.40 max. @ 4 – 6 GHz
RF-Leakage 4.4.8 60 dB minimum @ 1 GHz (flexible cable)
70 dB minimum @ 1 GHz (semi-rigid cable)
Voltage Rating (at sea level) ≤ 170 Vrms (depending on cable)
Contact Resistance 4.4.2 center contact: ≤ 10 mΩ
4.4.3 outer contact: ≤ 5 mΩ
Insulation Resistance 4.4.4 1,000 MΩ minimum
Dielectric Withstanding Voltage 4.4.5 500 Vrms (at sea level)
Mechanical CECC 22000
Mating Snap-on coupling
Contact Captivation 4.5.2 2.3 lbs
Engagement Force 4.5.4 ≤ 3.4 lbs (15N)
Disengagement Force 4.5.4 ≥ 1.4 lbs (6N)
Durability (matings) 4.7.1 500 cycles minimum
Environmental CECC 22000 Test Requirement
Temperature Range 4.6.5 -55° C to +155° C
Thermal Shock 4.6.7 MIL-STD-202, method 107, cond. F
Moisture Resistance 4.6.6 MIL-STD-202, method 106
Corrosion 4.6.10 MIL-STD-202, method 101, cond. B
Vibration 4.6.3 3 cycles, 3 opposite directions, 10 – 150 Hz

10 – 60 Hz: 0.75mm/0.03in., 60-150 Hz: 10 G

Mechanical Shock 4.6.4 MIL-STD-202, method 213, cond. B
Humidity 4.6.6 MIL-STD-202, method 103, cond. B
Material CECC 22000 Test Requirement
Body and Outer Contacts Brass, nickel or gold plated
Male Contact Brass, gold plated
Female Contact Beryllium copper or phosphor bronze, gold plated
Crimp Ferrule Copper or brass, nickel plated
Insulator LCP, PTFE or PFA

Note: These characteristics are typical but may not apply to all connectors.

More Information

For more information about our products, please contact us directly at 301.838.4380 or email us at sales@shireeninc.com

RFC®, Registered trademark of Shireen Inc
LMR®, Registered trademark of Times Microwave Systems
———————————————————-

FCC notice: The marketing, sale and use of power amplifiers are governed by and subject to FCC rules & regulations under Part 15.247. Shireen’s ISM band amplifiers are available for export, military, OEM & licensed customers only. It is the responsibility of the purchaser/installer/operator to insure that only approved equipment/systems are deployed. Shireen provides full engineering support to OEMs interested in certified systems.